| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 03032 | |
| Number of page(s) | 4 | |
| Section | Geology, Mapping, and Remote Sensing | |
| DOI | https://doi.org/10.1051/e3sconf/202016503032 | |
| Published online | 01 May 2020 | |
Simulation Research on Application of Azimuth Electromagnetic Wave in Coal Seam Detection
1 School of Geosciences, China University of Petroleum (East China), Qingdao, 266580, China
2 CCTEG XI’AN Research Institute, Xi’an, Shaanxi, 710077, China
Aiming at the problems of poor detection accuracy and low efficiency on the roof and floor interface in horizontal well drilling in coal mine, the design idea of explosion-proof azimuth-while-drilling electromagnetic wave logging instrument in coal mine was put forward. In order to suit the working environment of underground coal seam, the change law of the influence of instrument parameters such as source distance and coil installation angle on the signal response was obtained through forward simulation. Through the simulation research on the response of azimuth-while-drilling electromagnetic wave logging instrument, it provided a basis for selection of parameter optimization design of the instruments applicable to the underground coal mine, and the change law of the response of coal rock roof and floor interface was mastered. The application of this instrument will improve the detection accuracy and efficiency on the roof and floor.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.