Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
---|---|---|
Article Number | 03045 | |
Number of page(s) | 4 | |
Section | Geology, Mapping, and Remote Sensing | |
DOI | https://doi.org/10.1051/e3sconf/202016503045 | |
Published online | 01 May 2020 |
Sintering Mechanism of silicon from K2SiF6-Al
1 Shandong Institute of Geological Sciences, Jinan, Shandong, 250013, P. R. China
2 Shandong Agriculture and Engineering University, Jinan, Shandong, 251100, P. R. China
* Corresponding author: zgzok2005@163.com
In order to clarify the reaction process of Si phase, Differential Scanning Calorimeter (DSC), as the main measurement, was used to prepare Si samples and monitor the sintering reaction process. Combined with X-ray diffraction analysis, the formation process of Si phase was summarized. The reaction between K2SiF6 and Al powders occurred at 580°C, but not completed until 660°C. The whole formation process of Si includes two different stages: One is the solid–solid reaction stage, the other is the solid–liquid reaction stage.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.