| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 06006 | |
| Number of page(s) | 5 | |
| Section | Electrical and Power Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202016506006 | |
| Published online | 01 May 2020 | |
Research on influence of welding root node coupling on welding deformation of large mining dump truck frame
Xuzhou XCMG Mining Machinery Co. Ltd, Xuzhou, J S 221004, China
Taking the frame of large-scale mining dump truck as the research object, it established the model of coupling or not of T-joint welding root by the finite element analysis, and analyzed the deformation of coupling or not of T-joint welding root. The deformation trend of the two cases is the same, which verifies the correctness of the prediction results of deformation. The results show that the maximum deformation occurs at the arc starting welding of the vertical plate, and the error between the simulation results and the test results is small. At the same time, the deformation error of gantry frame and hinge-hole at the key position can meet the production requirements, which is of great significance to the field production.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.