| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 06019 | |
| Number of page(s) | 7 | |
| Section | Electrical and Power Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202016506019 | |
| Published online | 01 May 2020 | |
Design and Realization of Intelligent Phase-controlled System for Permanent Magnetic Actuator of AC Contactor
SuZhou Nuclear Power Research Institute Co., Ltd., China
* Corresponding author: chenyabin2@cgnpc.com.cn
When the AC contactor switches the capacitor bank, the phase angle of the power grid is random, so the electromagnetic transient process will generate large inrush current and overvoltage, causing large disturbance to the power system. A set of AC contactor with permanent magnetic actuator (PMA) and its intelligent phase selection control system are designed to solve this problem. Firstly, the PMA is designed. The dynamic characteristics of the actuator are simulated and analyzed in ANSOFT to meet the performance requirements of phase selection control. Then the principle of phase selection control and the strategy of switching capacitor bank are analyzed. Based on this, the software and hardware of intelligent phase selection control system are designed, including phase selection control module, IGBT driver module and coil discharge module. Finally, the experimental verification is carried out on the designed AC contactor. The test results show that the phase selection errors of the designed intelligence system are within 1°, and the contactor closing and opening time deviations are within 0.5ms, which means the system can effectively realize the closing and opening control at the specified phase angle.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.