E3S Web Conf.
Volume 166, 2020The International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2020)
|Number of page(s)||7|
|Section||Sustainable Materials and Technologies|
|Published online||22 April 2020|
Selection of effective corrosion inhibitors for bischofite solutions and simulated medium of formation waters
National University “Yuri Kondratyuk Poltava Polytechnic”, Department of Oil and Gas Engineering and Technology, 24 Pershotravneva Ave., Poltava, 36011, Ukraine
* Corresponding author: email@example.com
Questions of the corrosion inhibitors selection for protection of oil-field pipelines have been studied in the article. Results of research of technological and anticorrosive properties of the corrosion inhibitors in mediums simulating industrial environments are presented. The methodological approaches to selection of the corrosion inhibitors on a stage of laboratory experiments on an example of Kaverdinsky gas-condensate deposites have been described. It was found that all the surfactants tested in the simulated medium of the formation waters show a protective effect of more than 90% with a dosage of 1 g/dm3. It is recommended to use bischofite solution with a mass fraction of 24% MgCl2 and corrosion inhibiting 0.1% КI-1M admixture to protect industrial gas pipelines from carbon dioxide corrosion. This composition provides a degree of corrosion protection to 99.6%. The results of industrial tests confirmed the effectiveness of complex system – bischofite solution with a mass fraction of 24 % MgCl2 and addition of 0.1% KI-1M corrosion inhibitor. The cationic surfactants KI-1M, St, SRK and amphoteric surfactants EM and KAPB effectively protect in simulating medium and provide a degree of protection from carbon dioxide corrosion to 91.2-98.9%.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.