Issue |
E3S Web Conf.
Volume 167, 2020
2020 11th International Conference on Environmental Science and Development (ICESD 2020)
|
|
---|---|---|
Article Number | 05005 | |
Number of page(s) | 5 | |
Section | Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/202016705005 | |
Published online | 24 April 2020 |
Modelling and analysis of grid-connected solar-PV system through current-mode controlled VSC
Electrical Power and Energy, Military Technical College, Cairo, Egypt
Recently, solar-PV energy becomes one of the most vital renewable resources of electrical energy as it is utilized in all life applications. In case of connecting the solar-PV system with the utility grid a voltage-sourced converter (VSC) is required to convert the extracted solar-PV array’s DC power into AC. There are many methods to dominate the active and reactive power produced from the VSC. In the following model we use the current mode control as it has some features such as highly output accuracy, protection against over current troubles, robustness against AC side voltage and load variations. As the produced power from the solar cells is intermittent, the point of maximum power has to be tracked using an MPPT technique. Also, in order to reduce the system harmonics a filter must be implemented in the model. In this paper, a complete model of 50KW grid-connected solar-PV system using current-mode controlled two-level three-phase VSC (grid imposed frequency VSC) is implemented. Also, the Incremental Conductance model to track the point of maximum available power (MPPT) and LCL filter has been provided into the system with total harmonic distortion (THD) analysis in PSCAD/EMTDC
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.