Issue |
E3S Web Conf.
Volume 168, 2020
II International Conference Essays of Mining Science and Practice
|
|
---|---|---|
Article Number | 00012 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202016800012 | |
Published online | 06 May 2020 |
Research on the relative productivity of a drum mill type SAG 8.5×5.3
University of Mining and Geology “St. Ivan Rilski”, 1700, Sofia, “prof. Boyan Kamenov” Str., Bulgaria
* Corresponding author: ivan.minin@mgu.bg
The determination of the optimal operational mode of drum mills can be assessed by different criteria. The most important of them can be formulated as follows: “To be specified and established the values of the mill operational parameters regarding to which it is possible to be provided the user’s expected performance at the required quality of the final product and the same to be achieved at minimal energy consumption”. For the fulfillment of this condition, there has to be determined the laws of productivity variation, the final product quality and the energy consumption in function of the adequately chosen representative control parameters of the mill. There are obtained mathematical models, describing the most important technological parameters of the machine and are made conclusions about the factors influencing on them.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.