E3S Web Conf.
Volume 174, 2020Vth International Innovative Mining Symposium
|Number of page(s)||8|
|Section||Environment Saving Mining Technologies|
|Published online||18 June 2020|
Improving the method for determining the granular media strength performance by oblique shear test
1 T.F. Gorbachev Kuzbass State Technical University, 28 Vesennyayastreet, Kemerovo, Russian Federation
2 M.M. Adyshev Osh Technological University, 81 N. Isanovstreet, Osh, Kyrgyz Republic
∗ Corresponding author: firstname.lastname@example.org
To ensure the strength performance of the pavement of open pit truck roads, it is necessary that it conforms not only to the designed required deformation (elasticity) modulus, but also to the condition for ensuring the shear resistance of structural layers made from non-cohesive and lowly cohesive granular media. However, today there are no reliable methods for determining the strength performance of coarse-grained materials, therefore, for them there are no designstrength values, and therefore their shear resistance is not evaluated, which is a serious omission. It is proposed to evaluate the strength performance of granular media by the oblique sheartest, for which an improved design of oblique shear apparatus was developed, which made it possible to adjust the granular medium density (structure) to the corresponding density (structure) under construction conditions. An analysis was also made of the influence of the angle of inclination of the shear area on the predicted values of normal and shear stresses arising in the cross section, which made it possible to establish the recommended values of this indicator depending on the prevailing particle size of the test medium.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.