Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 05014 | |
Number of page(s) | 7 | |
Section | Agricultural Machinery | |
DOI | https://doi.org/10.1051/e3sconf/202017505014 | |
Published online | 29 June 2020 |
The work of the cutting beater in the transition zone threshing and separating devices combine harvesters
Don State Technical University, 1, Gagarin square, 344003, Rostov-on-Don, Russia
* Corresponding author: bys_ka87@mail.ru
In this article we studied the work of cutting beater in the transition zone of a combine harvester threshing drum. The influence of the parameters of the beater on the reflection of grains in its interaction with the heap flow and feed to the first stage of the straw-cutter is considered. A constructive scheme of the location of the working bodies of the transition zone showed a decrease in losses for straw.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.