Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 05035 | |
Number of page(s) | 8 | |
Section | Agricultural Machinery | |
DOI | https://doi.org/10.1051/e3sconf/202017505035 | |
Published online | 29 June 2020 |
Diagnostics of hydraulic density of plunger couple of tractor diesel
1
Irkutsk State Agricultural University named after A.A. Ezhevsky, 664038, Irkutsk region, Irkutsk distrikt, Molodezhny settlement, Russia
2
Buryat State University named after D. Banzarov, 24a, Smolin st., 670000, Ulan-Ude, Russia
* Corresponding author: Bodt-24@rambler.ru
The article considers the process of developing diagnostic mathematical models that take into account the influence of the hydraulic density of the plunger pair associated with wear. To estimate leaks of precision parts, methods for calculating the cycle feed for wear of plunger pairs are presented. The position of the cut-off edge relative to the hole changes due to the injection movement and rotation of the plunger during the regulation of the fuel cycle. The method and results of accelerated testing of plunger pairs are also presented.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.