Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 08010 | |
Number of page(s) | 10 | |
Section | Food Process Engineering and Technology | |
DOI | https://doi.org/10.1051/e3sconf/202017508010 | |
Published online | 29 June 2020 |
The use of Soxhlet extractor for the production of tinctures from plant raw materials
Kemerovo State University, 6, Krasnaya St., 650000, Kemerovo, Russia
* Corresponding author: prosinmv@yandex.ru
The most important stage in the production of tinctures and aromatic alcohols is the extraction process. The paper aims to study the process of extracting target compounds from fruit and berry raw materials for the production of alcoholic tinctures. The research was carried out using a Soxhlet extractor. The experimental results were processed using the method of multiple regression analysis. As a result of processing the experimental data, the optimal technological regime parameters for the production of aromatic cranberry alcoholic tincture were selected. The cranberry tinctures produced at these parameters have a high content of target substances and reach maximum scores for taste, aroma and color. The obtained regression equations allow predetermining the quality of the resulting drink with a confidentiality of more than 90%. The use of the Soxhlet extractor allowed reducing the duration of the preparation of the cranberry tincture to 15 minutes, which is by times different from the classic method of tincture production. The use of the Soxhlet extractor allows reducing the consumed amount of solvent and raw materials, due to the almost maximum rate of the extraction. All this, in turn, affects the cost of the final product and the costs of the manufacturer.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.