E3S Web Conf.
Volume 175, 2020XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|Number of page(s)||7|
|Section||Organic Farming and Soil Management|
|Published online||29 June 2020|
Methodology and results of studying soil moisture after the interaction with the operating devices
State Scientific Establishment “Agricultural Research Center “Donskoy”, 14, Lenin st., 347740, Zernograd, Russia
2 Don State Technical University, 1, Gagarin sq., 344003, Rostov on Don, Russia
* Corresponding author: email@example.com
Operating devices for soil cultivation in arid conditions should not carry the lower layers to the surface of the field, since this leads to the loss of moisture due to its evaporation. Purpose of work is to determine the moisture content in the soil after using new operating devices. There been developed technique of determining the moisture content in the soil after exposure to operating devices by studying the movement of soil layers in the vertical direction and comparing their moisture. The movement of soil in the vertical direction is quantified by a comparative study of the moisture content in the upper and lower layers of the treated formation before and after exposure to operating devices. Using appropriate equipment, there were determined the moisture content in the most susceptible to evaporation surface layer of 0–5 cm and then the average value of the layer-by-layer measurement up to a depth of 25 ÷ 35 cm, depending on the selected operating modes of the operating device.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.