| Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
|---|---|---|
| Article Number | 11010 | |
| Number of page(s) | 6 | |
| Section | Agricultural Structures | |
| DOI | https://doi.org/10.1051/e3sconf/202017511010 | |
| Published online | 29 June 2020 | |
Automation of the process of applying plaster on the walls of agricultural premises
Don State Technical University, 1, Gagarina Sq., 344003, Rostov-on-Don, Russia
* Corresponding author: olga_cvetkova@mail.ru
Plastering works are distinguished by complex technology and the use of a large number of manual working methods. Eliminate manual labor, significantly increase productivity and improve the quality of the plastering is possible based on the automation of applying plaster. The article discusses two ways to control the amount of plaster mixture: direct regulation of the amount of plaster mixture by changing the performance of the nozzle and regulation of the amount of plaster mixture by optimizing the speed of the nozzle. The disadvantage of the first method is the need for preliminary calculation of the time instant of the nozzle productivity change. The difficulty in solving this problem is due to the inertia of the device. In connection with these difficulties, it is proposed to use the second method of adjusting the amount of plaster mixture by optimizing the speed of the nozzle. The simulation of the proposed control system was carried out in the Matlab Simulink. The developed technique for applying plaster during automatic adjustment of the nozzle speed provides the necessary speed of the working tool depending on the surface irregularities.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.