Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 11017 | |
Number of page(s) | 12 | |
Section | Agricultural Structures | |
DOI | https://doi.org/10.1051/e3sconf/202017511017 | |
Published online | 29 June 2020 |
Modeling of air handling processes in systems of conditioning premises
Voronezh State Technical University, 20 let Oktyabrya Street, 84, Voronezh, 394006, Russia
* Corresponding author: Kafedravgasu@yandex.ru
Production premises should be provided with air conditioning in order to ensure and maintain required indoor climate parameters for proper technological process running. The paper presents analytical dependences that allow assessing the amount of heat supplied into a premise of processing meat products. A method of determining air parameters was proposed for implementing central conditioning under a technological process running in a premise. For a warm season, the air handling processes that involve or do not involve after-warming were drawn up using Id-chart depicting the state of humid air; the need for air recirculation was observed. The need for dehumidification of inlet air was defined and recommendations were proposed to be fulfilled. The method for evaluation of recirculation air amount was amended. For a cold season, the air handling processes that involve or do not involve preheating were drawn up using Id-chart depicting the state of humid air; the system of free cooling was proved reasonable to apply.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.