Issue |
E3S Web Conf.
Volume 175, 2020
XIII International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness – INTERAGROMASH 2020”
|
|
---|---|---|
Article Number | 12015 | |
Number of page(s) | 8 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202017512015 | |
Published online | 29 June 2020 |
Technologically significant properties of municipal solid waste compost
Saint-Petersburg State Institute of Technology, 190013, 26 Moskovsky prospect, St. Petersburg, Russia
* Corresponding author: malexpush@bk.ru
The paper presents the results of studies of the technologically significant properties of municipal solid waste (MSW) compost produced by MSW processing enterprises in St. Petersburg (Russia) where the Dano drum process is implemented. The chemical and microbiological composition of compost, as well as heat during ripening, are investigated. The chemical composition of industrial compost produced in St. Petersburg does not make it possible to use it as fertilizers and soil in agriculture. From the microbiological point of view, NSW compost is not dangerous, but the content of indicator groups of microorganisms classifies it as contaminated soil. The heat generation of compost during ripening is uneven - the largest share of heat 78.5% is released in the first year of maturation. In absolute terms, this value is 3250 kJ/kg by dry weight. To ensure the process is carried out during a period when the compost temperature is higher than the ambient temperature, toxic substances must be added to the compost in an amount not more than 400 times the pollutant content in waste of the 4th hazardclass.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.