Issue |
E3S Web Conf.
Volume 177, 2020
XVIII Scientific Forum “Ural Mining Decade” (UMD 2020)
|
|
---|---|---|
Article Number | 04003 | |
Number of page(s) | 9 | |
Section | Ecology | |
DOI | https://doi.org/10.1051/e3sconf/202017704003 | |
Published online | 08 July 2020 |
Investigations of electrophysical monitoring in a full-scale experiment to clean soil contaminated with oil
T.F. Gorbachev Kuzbass State Technical University, 650000, Str. Vesennyaya 28, Kemerovo, Russian Federation
* Corresponding author: shabanovea@kuzstu.ru
This article presents the main results of the study of electrophysical processes occurring in the zone of electrical processing during the cleaning of soils from oil pollution. The main conclusions are formulated about the processes occurring in the electric processing zone by changing the relative electrical resistance of the soil, which was measured using microprobe sensors. A comparative analysis of the results of a laboratory experiment on the electrochemical cleaning of contaminated soil in a tank is carried out with the results of a full-scale experiment conducted on a plot of a soil mass in real conditions, but artificially contaminated with oil products (gasoline, used oil. Using single measurements of electrical resistivity by microprobe sensors, the spread of the pollutant in the soil was clarified , the relationship between the physical properties of the array and its electrical wire is established conductive properties. Confirmed high efficiency of this type of control in the study of complex processes occurring in the contaminated ground array.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.