Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202017801010 | |
Published online | 09 July 2020 |
Improving Energy and Environmental Efficiency of Combined Heat-and Power Plant Based on Absorption Heat Transformers
1
Moscow Power Engineering Institute, Moscow, Russia
2
Eurasian National University, Nur-Sultan, Republic Kazakhstan
* Corresponding author: SultanguzinIA@mpei.ru
In the present paper the scheme for increasing the energy efficiency of combined heat and power plants (CHPP) using absorption heat transformers (AHT) is considered. The aim of the study is to increase the energy and environmental efficiency of natural gas use in power supply systems by application steam turbine plants and absorption heat transformers. The simulation of CHPP modernization and a harmful emissions dispersion assessment were carried out using the following software tools: ISC Manager, Thermoflex. All the calculations were made for one power unit of the CHPP in Moscow. Subsequently, the obtained data on energy efficiency increase and harmful emissions reduction were multiplied on the whole power system of Moscow, the main source of heat and electricity of which are the CHPP’s of PJSC “Mosenergo”.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.