| Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
|---|---|---|
| Article Number | 01045 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202017801045 | |
| Published online | 09 July 2020 | |
Modeling of application the FACTS devices on the example of power system of United Power System of Center
1
Vologda State University, Lenina Street 15, Vologda, 160000 Russia
2
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: alexu79@mail.ru
This paper considers installation of a flexible AC transmission system (FACTS) device on the 500 kV line of substation (SS) Belozerskaya - SS Vologodskaya of the United Power System of Center. Three FACTS devices in normal operation mode were modeled: a static reactive power compensator (STATCOM), a static synchronous series compensator, and a unified power flow control system. The obtained results are summarized in Table, which substantiates the choice of the best compensation for the Belozerskaya Vologodskaya line.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.