Issue |
E3S Web Conf.
Volume 180, 2020
9th International Conference on Thermal Equipments, Renewable Energy and Rural Development (TE-RE-RD 2020)
|
|
---|---|---|
Article Number | 04006 | |
Number of page(s) | 8 | |
Section | Miscellaneous | |
DOI | https://doi.org/10.1051/e3sconf/202018004006 | |
Published online | 24 July 2020 |
Finite element analysis of the compaction plate from a garbage truck
Politehnica University of Bucharest, Faculty of Biotechnical Systems Engineering, Romania
* Corresponding author: constantin.gabriel.alex@gmail.com
Vehicles that collect and transport household waste are equipped with complex systems that perform the loading of the waste from the stationary collection containers, take over and pre-compact of material, compaction in the body of the structure and finally the landfill of the collected waste. Of all these operations, the compaction process is by far the most mechanically demanding. In this paper, the structural analysis of the compactor plate from a garbage truck is presented. In the first stage it was carried out parametric modelling of the assembly composed of compactor plate, counter pressure plate, the back of the garbage truck and to be compacted material. After assembly, the dynamic simulation of the compaction process in the garbage truck was performed, and the compaction mechanical stresses for the compactor plate were loaded in the Simulation module of the SolidWorks 2016 program. Here the finite element analysis was performed, resulting in the value and dispersion of the equivalent stresses (calculated by von Mises criterion), displacements and relative deformations of compactor plate from the analysed garbage truck.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.