E3S Web Conf.
Volume 180, 20209th International Conference on Thermal Equipments, Renewable Energy and Rural Development (TE-RE-RD 2020)
|Number of page(s)||8|
|Published online||24 July 2020|
Dynamic behaviour of pneumatic actuators in open-loop controlled by proportional valves
University Politehnica of Bucharest, Power Engineering Faculty, 313 Splaiul Independentei, 060042, Bucharest, Romania
* Corresponding author: s firstname.lastname@example.org
The development of proportional and servo-mechanisms hydraulic control technique offered the premises of the development of pneumatic control, too. Despite the disadvantages of the nonlinearities appeared in the pneumatic systems (air compressibility being one of the causes), the new generation of proportional equipment made it possible to have a good quality pneumatic control system in our days. The goal of the paper is to demonstrate, by using numerical simulation technique, that the proportional valves used in pneumatic actuator drives occur at a good system dynamic at a reasonable cost as against to the directional control valve as it usually used in pneumatic actuator drives.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.