| Issue |
E3S Web Conf.
Volume 185, 2020
2020 International Conference on Energy, Environment and Bioengineering (ICEEB 2020)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Power System | |
| DOI | https://doi.org/10.1051/e3sconf/202018501059 | |
| Published online | 01 September 2020 | |
Research on battery peak power control method based on Improved PSO algorithm
Zhuhai College of Jilin University, Zhuhai, Guangdong 519041, China
* Corresponding author: sjl@jluzh.edu.cn
In order to better guarantee the operation effect of power equipment, a battery discharge peak power control method based on Improved PSO algorithm is proposed. The operation parameters between the peak power of battery discharge and external power supply are collected, and the operation parameters are switched by using the support bus. The power acquisition process of battery operation is standardized, and the power of battery power conversion unit is controlled by improving PSO algorithm. The results show that the control error of the battery peak power control method based on the improved PSO algorithm is significantly lower in the actual process, and the control accuracy is improved.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.