Issue |
E3S Web Conf.
Volume 192, 2020
VIII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2020)
|
|
---|---|---|
Article Number | 01011 | |
Number of page(s) | 6 | |
Section | Geotechnical and Geomechanical Problems of Development of Mineral Resources | |
DOI | https://doi.org/10.1051/e3sconf/202019201011 | |
Published online | 30 September 2020 |
Assessment and control of geodynamical risks under the conditions of a rock-bump hazardous complex deposit
1
Mining Institute FEB RAS, 51 Turgenev st., Khabarovsk, 680000, Russia;
2
Far Eastern Federal University, 690014, Vladivostok, Russia
* Corresponding author: alex-igd@mail.ru
Research has been carried out to study the peculiarities of rockbump hazards and induced seismic manifestations at the Nikolaevskoe deposit, and their close correlation with the tectonic structure of the rock massif has been established. In order to strengthen control over the rock-bump hazard in the TN-3 high-angle fault, in 2019 the observation network was expanded and continuous seismoacoustic monitoring of the rock mass at the deep levels of Nikolaevskoe deposit was organized. Monitoring data is verified by local geoacoustic method using the portable device “Prognoz L”. The results of the monitoring revealed major acoustically active zone with the main amount of seismic and acoustic events recorded during the last 5 years and occurring dynamic rock pressure manifestations. Nikolaevskoe deposit was the site of execution of the industrial experiment on regional discharge of a potentially rock-bump hazardous section of a shock blasting massif.
Key words: rock-bump hazard / induced seismicity / rock bumps / tectonic structure / seismoacoustic monitoring / acoustically active zone / shock blasting
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.