Issue |
E3S Web Conf.
Volume 192, 2020
VIII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2020)
|
|
---|---|---|
Article Number | 04014 | |
Number of page(s) | 8 | |
Section | Innovative Technologies and Methods for Monitoring Natural and Mining Systems | |
DOI | https://doi.org/10.1051/e3sconf/202019204014 | |
Published online | 30 September 2020 |
Improvement of the automated seismic and acoustic monitoring system “Prognoz-ADS” main elements
Mining Institute FEB RAS, 51 Turgenev st., Khabarovsk, 680000, Russia
* Corresponding author: pav.anik@mail.ru
The results of theoretical and experimental studies have established the need to improve and modernize the highly sensitive piezoelectric resonant type PeA12 converters used in the seismic monitoring system, which have been successfully used for more than 30 years in the rock mass at a number of rockburst hazardous mines. The main problem of the accuracy measurement by the geophone PeA12 (and other models based on it) is due to the presence of several resonances in the operating frequency band. The developed upgraded model of the AP2088 converter has successfully passed industrial testing as part of the automated monitoring system “Prognoz-ADS” at rockburst hazardous mine. During the test period (more than 1 year), seismoacoustic events were registered and verified in the rock mass, including rock burst and shocks in the rock mass. Thus, the use of highly sensitive (u10 V/m•s-2) piezoacoustic converters AP2088 as part of the automated system provides registration of acoustic emission in the rock mass in the frequency range from 0.1 to 10 kHz with the energy of seismic events from 10 to 106 J, which will increase the reliability of the forecast of geodynamic phenomena and technogenic seismicity in the control zone of the system.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.