Issue |
E3S Web Conf.
Volume 193, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
|
|
---|---|---|
Article Number | 01031 | |
Number of page(s) | 8 | |
Section | Agricultural Science | |
DOI | https://doi.org/10.1051/e3sconf/202019301031 | |
Published online | 08 October 2020 |
Influence of parameters of a pneumatic grain seeder distributor on the uniform distribution of seeds
1
Ural Federal University named after First President of Russia B.N. Yeltsin, Ekaterinburg, the Russian Federation
2
South Ural State Agrarian University, Troitsk, the Russian Federation
3
Kazakh Agrotechnical University named after S. Seifullin, Astana, R. Kazakhstan
* Corresponding author: 555maxim@mail.ru
The article considers the issue of substantiating the distributing working body parameters for a pneumatic grain seeder. Work on the subject matter is mainly experimental in nature and not sufficiently deeply worked out theoretically. Based on computer simulation, the article determines the most preferred layout of the distributor dividing head, establishes a rational form of the reference cone and the location of the outlet pipes. Based on the simulation of the movement of seed grain particles, the individual design parameters of the distributor dividing head are specified. The results of experimental studies are presented confirming the theoretical background.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.