E3S Web Conf.
Volume 194, 20202020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|Number of page(s)||4|
|Section||Energy Engineering and Energy Development and Utilization|
|Published online||15 October 2020|
The research on the classification method of high water-cut well group in Y block
Geological Brigade of the first oil Production Plant of Daqing Oilfield Co. LTD
Y block has entered the ultra-high water cut stage of production, and the water cut of oil wells is generally higher than 90%. Before polymer flooding, water cut continues to rise. High-water-bearing wells in the injected area are characterized by difficulty in effectiveness and low water cut decline, which seriously affects the overall development effect of the area. In this paper, the high water-bearing wells are divided into four categories by the parameter index of the number of layers in the high water-bearing channels before polymer flooding.Through the splitstream curve and the phase permeability curve, the permeability and oil saturation data under the condition of 98% water content were selected for fitting, and the critical oil saturation formula was obtained.The ratio between the oil saturation and the critical oil saturation is calculated by numerical simulation, and the discriminant standard of the dominant seepage channel with high water content is established.Compared with previous remaining oil saturation field identification methods, changed the method according to the conventional ideas of remaining oil saturation evaluation of water and residual oil, through the analysis of reservoir permeability parameters for the current development under the condition of the target reservoir quantitative identification of the cause of high water cut, to cause high containing water wells and reservoir high water cut oilfield management work provide quantitative analysis and objective guidance.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.