Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
---|---|---|
Article Number | 05064 | |
Number of page(s) | 5 | |
Section | Environmental Engineering, Ecological Environment and Urban Construction | |
DOI | https://doi.org/10.1051/e3sconf/202019405064 | |
Published online | 15 October 2020 |
Facile preparation of BCN nanofibers with tunable band gaps
1 College of Science, National University of Defense Technology, Changsha, Hunan, 410073, China
2 College of Chemistry, Xiangtan University, Xiangtan, Hunan, 411105, China
* Corresponding author: tjhu@nudt.edu.cn
As a new synthetic metal-free material, BCN has aroused great interests in the field of photocatalyst materials due to its lower cost as well as higher reliability and better sustainability. In this work, we prepared BCN nanofibers by electrospinning of precursor solution containing polyacrylonitrile and ammonia borane, and then pyrolyzed the polymer fibers in NH3. Infrared spectroscopy (FT-IR), Scanning emission microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to analyse the composition and structure of the samples. The results show that the BCN nanofibers have an average diameter of 50-100 nm and mainly compose of BN nanocrystals. C atoms are distributed at the BN grain boundary in terms of B-C and B-N bonds. The band gap of the fibers is between 2.1-2.7 eV and can be adjusted by changing the ratio of PAN and AB in the raw materials.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.