| Issue |
E3S Web Conf.
Volume 198, 2020
2020 10th Chinese Geosynthetics Conference & International Symposium on Civil Engineering and Geosynthetics (ISCEG 2020)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 4 | |
| Section | Geosynthetics Applied Design Theory and Method | |
| DOI | https://doi.org/10.1051/e3sconf/202019801017 | |
| Published online | 26 October 2020 | |
Research and analysis of new paste filling material based on red mud iron tailings
College of Civil Engineering and Architecture, Shandong University of Science and Technology, 266590, Qingdao, Shandong.
* Corresponding author: 15588285580@163.com
In order to reduce the amount of high energy consumption materials such as cement in filling, save resources, and fully recycle industrial waste. In this paper, Changxing coal mine as the research background, through data analysis, and through the test configuration based on red mud iron tailings, mixed with desulfurization gypsum, lime, cement, activator of new cementitious materials. And through the test analysis, the best proportion of coagulant admixture is determined as follows: red mud iron tailings dosage 6, cement sand ratio 1:3, mass concentration 68%.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.