Issue |
E3S Web Conf.
Volume 206, 2020
2020 2nd International Conference on Geoscience and Environmental Chemistry (ICGEC 2020)
|
|
---|---|---|
Article Number | 03025 | |
Number of page(s) | 5 | |
Section | Geohydrology And Ocean Resources Exploration And Survey | |
DOI | https://doi.org/10.1051/e3sconf/202020603025 | |
Published online | 11 November 2020 |
Analysis of the Effect of Different Combinations of Observation Satellites on the Resolving Accuracy of GNSS Observation Data
1 Natural Resources Information Center of Guangxi Zhuang Autonomous Region, Nanning, Guangxi, 530023, China
2 Guilin University of Technology at Nanning, Department of Civil and Surveying Engineering, Chongzuo, Guangxi, 530023, China
* Corresponding author: 840062819@qq.com
In this paper, 24 C-level control points under different terrain conditions were selected to be the testing points. The binary-satellite system (GPS+GLONASS) and the triple-satellite system with BeiDou Navigation Satellite System (BDS) (BDS+GPS+GLONASS) were adopted for static measurement; and the observation data from BeiDou Ground-based Augumentation System (GBAS) base stations in Guangxi were collected for solution. By comparing the residuals of GPS tri-dimensional baseline vectors and the internal accord accuracy of each control point under the binary and triple-satellite systems, the effect of data collected by different satellite systems under different terrain conditions on measurement accuracy was studied. According to the results, (1) the triple-satellite system with BDS showed more stable measurement accuracy; (2) in plane, the two systems were of equivalent measurement accuracy in mountainous and flat areas; in elevation, the triple-satellite system showed higher and more stable measurement accuracy.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.