| Issue |
E3S Web Conf.
Volume 209, 2020
ENERGY-21 – Sustainable Development & Smart Management
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 6 | |
| Section | Session 1. Towards Intelligent Energy Systems | |
| DOI | https://doi.org/10.1051/e3sconf/202020902004 | |
| Published online | 23 November 2020 | |
Development of Mechanisms for Active-Adaptive Control of Reactive Power Based on Intelligent Electrical Networks
1 T.F. Gorbachev Kuzbass State Technical University, 650000, 28 Vesennyaya St., Kemerovo, Russia
2 Siberian Federal University, 660041, 79 Svobodny Av., Krasnoyarsk, Russia
* Corresponding author: brv.egpp@kuzstu.ru
Improving the energy efficiency of the power grid complex is an urgent problem. The need to solve this problem is due to various technical and economic reasons. First of all, this is due to high power losses in distribution electrical networks, caused by a significant load of its elements by reactive power flows. In this regard, the development of mechanisms for active-adaptive control of reactive power is becoming increasingly important. Currently, the Smart Grid concept has become widespread in the global electric power industry. The use of these technologies allows not only to optimize power losses in distribution networks, but also to improve the efficiency of the electric grid complex. The article proposes an algorithm for optimizing the placement of compensating devices in the distribution network on the example of one of the territorial network organizations of the Kuzbass. This algorithm is based on the theory of multilevel systems using the method of indefinite Lagrange multipliers. The results of applying this algorithm based on the developed simulation model are presented.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.