| Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 8 | |
| Section | Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202021001006 | |
| Published online | 04 December 2020 | |
Combined process of vibratory processing and oxidation with the use of polymeric environments
Don State Technical University, Gagarin sq., 1, Rostov on Don, 344003, Russia
* Corresponding author: spopov1957@yandex.ru
Studies were carried out to combine vibration processing and oxidation in polymer working media, which allowed to combine three technological stages. Characteristic traces of direct and oblique impact of the polymer working medium, along the surface of the metal with oxide film, are determined. Studies of the structure of the nanorelief of the vibrational chemical-mechanical oxide coating and the main parameters of the process are.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.