Issue |
E3S Web Conf.
Volume 213, 2020
2nd International Conference on Applied Chemistry and Industrial Catalysis (ACIC 2020)
|
|
---|---|---|
Article Number | 02039 | |
Number of page(s) | 4 | |
Section | Energy Mining Research and Composite Material Performance Analysis | |
DOI | https://doi.org/10.1051/e3sconf/202021302039 | |
Published online | 01 December 2020 |
Research on C30 Concrete Mix Proportion in Guangdong Province
KZJ New Materials Group Co., Ltd. Xiamen 361101, Fujian, China
* Corresponding author: lgx502@foxmail.com
The reasons of C30 concrete bleeding in winter in Guangdong province were studied by collecting the concrete mix proportions of C30 concrete mixing plants in Guangdong, Fujian, Henan, Hunan, Chongqing and Shaanxi regions, the difference between the concrete mix proportions in Guangdong and other regions was investigated. Based on the representative concrete mix proportion in Guangdong province, the concrete bleeding water test was carried out, and the correlation between the amount of different cementing materials and the bleeding rate was investigated. The results showed that compared with other regions, the C30 concrete mix proportion in Guangdong has the lowest total cementitious material, which made it more prone to bleeding. The amount of slag powder and the total amount of cementitious materials have a high correlation with the bleeding rate. With the increase of the amount of slag powder and the total amount of cementitious materials, the bleeding rate decreases.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.