E3S Web of Conf.
Volume 216, 2020Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|Number of page(s)||5|
|Published online||14 December 2020|
Numerical modeling of combustion of gaseous and solid fuels in the furnaces of small and large boilers to reduce harmful emissions
1 JSC “Kazenergo”, Gabdulla Tukay str., 162, 420021, Kazan, Russian Federation
2 LLC “Parallax”, Adoratsky str., 29B, 420132, Kazan, Russian Federation
3 Kazan State Power University, Krasnosel’skaya str., 51, 420066, Kazan, Russian Federation
* Corresponding author: email@example.com
The issues of the formation of toxic compounds that enter the air of the residential area during the circulation of household waste and the provision of energy supply services, in particular, during the decentralization of heat supply to residential buildings, are considered. The problems of finding the optimal ways to reduce toxic emissions are solved using a numerical experiment based on computational fluid dynamics. The results of numerical modeling of the corresponding combustion device are compared with the geometry created using the Gambit software and in the Solid Edge 3D design environment. The influence of the pressure in the furnace on the characteristics of fuel combustion during operation in the pressurization mode of the recently widespread condensing boilers is given. Acceptable simplifications for the application of the normative method in the calculations of modern combustion devices with a specific geometry are proposed.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.