E3S Web of Conf.
Volume 216, 2020Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|Number of page(s)||3|
|Published online||14 December 2020|
Graphical-analytical method for constructing load characteristics
1 Tashkent State Technical University named after Islam Karimov, 100095, Uzbekistan, Tashkent, University St. 2A
2 Karakalpak State University, 230100, Uzbekistan, Nukus, Ch. Abdirov St.1
The article discusses a graphical-analytical method for constructing the load characteristics of a three-element resonant circuit in the current stabilization mode. The current stabilization mode is observed when compensating the negative section of the S-shaped characteristics of the parallel resonant circuit of the connected sequence with a linear inductance and with a linear capacitor characteristic. The equation of the load mode in a dimensionless form represents the equation of an ellipse, which makes it possible to construct the necessary characteristics of a three-element resonant circuit for various types of load.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.