Issue |
E3S Web Conf.
Volume 217, 2020
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2020)
|
|
---|---|---|
Article Number | 09011 | |
Number of page(s) | 8 | |
Section | Agricultural and Food Economics | |
DOI | https://doi.org/10.1051/e3sconf/202021709011 | |
Published online | 14 December 2020 |
New technological concept of utilization animal and poultry waste
Kuban State Agrarian University. I.T. Trubilina, Kalinina str., 13, Krasnodar, 350044, Russia
* Corresponding author: natamamas@mail.ru
Methods of disposal of manure / litter. There is a large amount of biological waste as a source of organic nitrogen in humus-forming fertilizer. The solution to this situation is the use of a new technological process - blending manure / litter with slaughter waste, as well as subsequent autoclave treatment and drying of the mixture. Equipment for manure / litter drying can be installed on the territory of the livestock / poultry complex in a convenient location. Installation options will be different, depending on the type of manure / litter, the presence / absence of slaughter production, the type of animals or birds, but only slightly. The set of equipment will be almost the same in all cases. As a fundamental decision on the use of new technology at the state level would be the following. Logistical, technological and territorial unification of two major tasks: disposal of solid waste with obtaining huge amounts of thermal energy and simultaneous disposal of manure / litter to produce humus- forming fertilizer. The economic efficiency of the proposed technology is determined by the cost of drying. The production of dried fertilizer is very energy intensive, since have to evaporate huge amounts of water.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.