Issue |
E3S Web Conf.
Volume 220, 2020
Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|
|
---|---|---|
Article Number | 01072 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202022001072 | |
Published online | 16 December 2020 |
The use of a digital controller in the loading system of the test bench to improve the accuracy of simulating the modes of oil pumping units
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: tobac15@mail.ru
Modern trends in the development of technologies are based on the need to conduct experimental studies of the developed equipment in laboratory conditions with the maximum approximation of operating modes to real ones. Such studies are impossible without the development of specialized stands with test automation systems. In modern test equipment systems, devices are often used to create a mechanical load on the shaft of the electric motor under study. As such a device, a system of frequency converter load asynchronous electric motor has been proposed and implemented, which has been tested at the test bench and has proven itself from the best side in comparison with traditional circuits using DC motors.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.