Issue |
E3S Web Conf.
Volume 220, 2020
Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|
|
---|---|---|
Article Number | 01080 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202022001080 | |
Published online | 16 December 2020 |
Optimal model for additional operation of the storage system for photovoltaic wind power plants
Tashkent State Technical University, Uzbekistan, 100095, Tashkent, University St., 2
* Corresponding author: elyor.saitov@mail.uz
This paper discusses methods for modeling and optimizing photovoltaic and wind power plants for the integrated use of solar and wind energy. The results of modeling the dependence of the characteristics of the solar battery and wind power plants on the input parameters are presented. Changes in the output volt-ampere and power parameters depending on environmental conditions are considered. Various programming methods for mathematical modeling of power plants are presented. Methods for optimizing the output characteristics of solar cells by connecting shunt diodes are presented. The operation of solar panels is analyzed on the basis of mathematical modeling of processes. The influence of weather conditions, temperature, and light on the output parameters of solar installations was studied. The advantages of integrated use of solar and wind installations with an energy storage system are also considered. We consider the prediction of wind speeds based on various distribution functions.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.