Issue |
E3S Web of Conf.
Volume 222, 2020
International Scientific and Practical Conference “Development of the Agro-lndustrial Complex in the Context of Robotization and Digitalization of Production in Russia and Abroad” (DAIC 2020)
|
|
---|---|---|
Article Number | 01019 | |
Number of page(s) | 12 | |
Section | Creation and use of Modern Digital, Intelligent, Robotic Systems and Technologies, New Materials and Methods of Construction, Big Data Processing and the Internet of Things in the Agro-Industrial Complex | |
DOI | https://doi.org/10.1051/e3sconf/202022201019 | |
Published online | 22 December 2020 |
Selection of operating modes of tillage implement with ring working tools by criteria of quality and energy inputs
Federal Scientific Agroengineering Center VIM, branch in Saint Petersburg, Filtrovskoje Shosse 3, p.o. Tiarlevo, 196625 Saint Petersburg, Russia
* Corresponding author: a.v.dobrinov@yandex.ru
Improving the tillage methods, machines and equipment to increase their efficiency is an urgent task. Tillage implements should provide high-quality tillage, save energy and improve the yielding capacity of cultivated crops. The study purpose was to obtain the experimental data, which would reveal the variation patterns of energy parameters and agrotechnical indicators of the tillage implement operation, and to identify the rational operation modes under specific operating environment. The study object was the developed tillage implement with ring working tools PM-2/DK for pre-seeding tillage. The study subject was to obtain the variation patterns in energy and agrotechnical indicators of the designed modification of the tillage implement with the ring working tools teamed with MTZ-920 tractor. The study used the modern methods of theory and experimentation to identify the main quality indicators of the technological process of surface tillage, as well as to determine the energy parameters of the machine, to generalize them, and to analyze the experimental data obtained. The variation patterns of energy and agrotechnical indicators were revealed, the rational operation modes of the tillage implement were justified, namely, working speed V=2.8-3.3 m/s; installation angle of the ring working tools α=15-22°; energy inputs of the technological process Ei = 373.80-431.18 MJ/ha.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.