Issue |
E3S Web of Conf.
Volume 225, 2021
II International Conference “Corrosion in the Oil & Gas Industry” 2020
|
|
---|---|---|
Article Number | 05006 | |
Number of page(s) | 3 | |
Section | Coating and Inhibitors | |
DOI | https://doi.org/10.1051/e3sconf/202122505006 | |
Published online | 05 January 2021 |
Binary Inhibitory Anti-Rust Paint
1 St. Petersburg State Marine Technical University, 190121, Lotsmanskaya, 3, Saint Petersburg, Russian Federation
2 Institute of Silicate Chemistry of Russian Academy of Sciences, 199034, Nab. Makarova, 2, Saint Petersburg, Russian Federation
* Corresponding author: vtrui2008@mail.ru
A combined approach to paint was used to increase the effectiveness of anti-corrosion protection was used. In particular, passive insulating coating materials was modified with active additives. A water-soluble anodic inhibitor of atmospheric corrosion was encapsulated in a phosphate conversion coating NOTECH. As a result, the corrosion under a layer of paint primer was suppressed. It is important that phosphating does not create a layer like paint. So, such an approach is universal and compatible with most known types of paint coatings and can be combined with temporary protection (preservation). The second paint layer of the coating contained a water-oil-soluble corrosion inhibitor of the group “M”, namely: N-M-1. It is adduct of natural fat vegetable acids and cyclohexylamine. The data of corrosion tests and polarization curves are presented, which confirm the high protective properties of the proposed binary inhibitory anti-rust paint.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.