| Issue |
E3S Web of Conf.
Volume 225, 2021
II International Conference “Corrosion in the Oil & Gas Industry” 2020
|
|
|---|---|---|
| Article Number | 06003 | |
| Number of page(s) | 5 | |
| Section | Failure Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202122506003 | |
| Published online | 05 January 2021 | |
Investigation of increased corrosion wear of heat exchange equipment pipes
JSC VNIKTINHO, Laboratory of analytical chemistry and corrosion, 400087 Volgograd, Russia.
* Corresponding author: kisssell@yandex.ru
The article discusses the stages of research to determine the possible causes of increased corrosion wear of tube bundles of heat exchangers. The most typical types of damage to heat exchanger pipes are shown, depending on the operating conditions. Recommendations aimed at reducing the corrosion wear of pipe bundles for typical operating conditions at oil refining enterprises.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.