| Issue |
E3S Web Conf.
Volume 233, 2021
2020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 6 | |
| Section | NESEE2020-New Energy Science and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202123301002 | |
| Published online | 27 January 2021 | |
Stripping and Excavating Control Technology of Spontaneous Combustion Area in Shallow Buried Coal Seam
1 Key Laboratory of Western Mine and Hazard Prevention, Ministry of Education of China, Xi'an, 710054, China
2 School of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an, 710054, China
Corresponding author’s e-mail: Zhangxinh71@126.com
The article expounds the principle, steps and results of detecting the fire source by the magnetic method. Based on the determination of the fire source range, by analyzing the actual situation of the shallow coal seam, comparing the advantages and disadvantages of the three different treatment methods and the applicable situation, a stripping is proposed. The law governs the fire zone and applies it in the governance zone. The results show that the magnetic detection technology has high detection accuracy and fast efficiency, and the stripping method has good fire extinguishing effect in the fire area, high safety, large amount of residual coal recovery, and is suitable for shallow buried fire sources. The study provides a scientific basis for fire detection, treatment, coal resource recovery, environmental protection and economic development in open-pit mine fire areas.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.