| Issue |
E3S Web Conf.
Volume 233, 2021
2020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|
|
|---|---|---|
| Article Number | 04046 | |
| Number of page(s) | 8 | |
| Section | MEA2020-Mechanical Engineering and Automation | |
| DOI | https://doi.org/10.1051/e3sconf/202123304046 | |
| Published online | 27 January 2021 | |
Research on Model Slice and Forming Method of Thin-walled Parts
School of Mechanical Engineering & Automation, Northeastern University, Shenyang, Liaoning, 110819, China
* Corresponding author: hhuli@mail.neu.edu.cn
According to the structural characteristics of thin-walled parts, a model slicing method is proposed, and its mathematical process is established. The three-dimensional transient temperature field in the process of synchronous powder feeding laser cladding is studied and verified by numerical simulation method, and the thin-walled parts formed by later experimental processing are processed by the results of numerical simulation. Using the simulation results of temperature field as the basis for optimizing the processing parameters, the forming path of thin-walled parts is programmed and optimized, and the experimental verification shows the reliability of this method.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.