Issue |
E3S Web Conf.
Volume 327, 2021
26th Scientific Conference on Power Engineering and Power Machines (PEPM’2021)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 10 | |
Section | Thermal Equipment, Heat and Mass Transfer Processes | |
DOI | https://doi.org/10.1051/e3sconf/202132701004 | |
Published online | 22 November 2021 |
Comparative technical and economic analysis of innovative methods for waste heat recovery from flue gases for boiler type BKZ 220-100
1 University of Ruse, Bulgaria
2 Technical University of Sofia, Bulgaria
3 Non-commercial “Almaty University of Power Engineering and Communication” JSC, Almaty, Republic of Kazakhstan
* Corresponding author: iki@uni-ruse.bg
Two alternative schemes for waste heat recovery from flue gases of boiler type BKZ 220-100 in the Stepnogorsk TPP (Kazakhstan) are presented. The technical solutions are innovative because they create conditions for deep heat recovery even when using battery emulsifiers to purify the gas flow. A characteristic feature of the schemes is the purification of a small part (10-15%) of the stream by means of a bag filter and the mixing of the stream with the main gas flow consisting of moist gases after a battery emulsifier. An analysis and assessment of the technical and economic feasibility of the implementation of the two alternatives has been carried out.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.