Issue |
E3S Web Conf.
Volume 327, 2021
26th Scientific Conference on Power Engineering and Power Machines (PEPM’2021)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 7 | |
Section | Design and Technologies for Clothing and Textiles | |
DOI | https://doi.org/10.1051/e3sconf/202132703003 | |
Published online | 22 November 2021 |
Methods for personal cooling in hot environment used in clothing and wearables
1 Technical University of Sofia, Department of Hydroaerodynamics and Hydraulic Machines, 1000 Sofia, Bulgaria
*1 Corresponding author: atanasvasilev9@gmail.com
The use of an efficient personal cooling system in hot environments is becoming increasingly popular, as the increased air temperature provokes thermophysiological discomfort, heat stress, reduced productivity and could lead to several health issues. Different methods and devices for personal and local cooling have been developed over the years. The paper summarises the cooling methods applied in clothing and wearable items: phase-change materials, Peltier elements, evaporative cooling, water cooling and hybrid cooling. The local vs total (of the whole body) cooling is examined. The passive and active colling are analysed in terms of advantages, disadvantages and application.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.