Issue |
E3S Web Conf.
Volume 329, 2021
4th International Conference on Green Energy and Sustainable Development (GESD 2021)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/e3sconf/202132901007 | |
Published online | 09 December 2021 |
Mathematical model and influence factor analysis for productivity prediction of fractured-vuggy carbonate reservoir when drilling into cavern reservoir
1 School of Energy, Chengdu University of Technology, Chengdu, China
2 Engineering Technology Research Institute, PetroChina Southwest Oil & Gas Field Company, Chengdu, China
3 China National Petroleum Corporation Southwest Oil and Gas Field Branch Chuanzhong Oil and Gas Mine, Suining, China
4 No.2 Gas Production Plant, PetroChina ChangQing Oilfield Company, Yulin, China
5 Development Division, Southwest Oil and Gas Field Branch, China National Petroleum Corporation, Chengdu, China
* Corresponding author: gongyufeng1995@stu.cdut.edu.cn
The seam hole type carbonate didn't touch type drill in the cave reservoir oil and gas resources is rich, but due to the large difference of unused reservoir capacity, capacity of main control factors and the evaluation model is not clear, so the reservoir is difficult to reasonable and effective development, in order to improve the cave reservoir development effect, find the factors influencing the cave reservoir capacity of the master,This article through to carry out the cave type carbonate reservoir capacity model test, the cave reservoir productivity prediction model is set up and analyze the factors affecting capacity, studies have shown that the wellbore storage coefficient and skin factor of cave type carbonate reservoir had a greater influence on the vertical well productivity, this paper research content for the cave type of carbonate reservoir reserves producing has a certain guiding significance.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.