| Issue |
E3S Web Conf.
Volume 330, 2021
URM 2021 - International Scientific and Research Conference on Knowledge-Based Technologies in Development and Utilization of Mineral Resources
|
|
|---|---|---|
| Article Number | 02008 | |
| Number of page(s) | 6 | |
| Section | Mining Machines and Transport Systems for the Mining Industry | |
| DOI | https://doi.org/10.1051/e3sconf/202133002008 | |
| Published online | 09 December 2021 | |
Titanium effect on the microstructure and properties of the layer deposited by Fe-C-Si-Мn-Сr-Mo-Ni flux cored wire on the parts working in severe wear conditions
Siberian State Industrial University, Novokuznetsk, 654000, Russia
* Corresponding author: kozyrev_na@mtsp.sibsiu.ru
The study results of the structure and properties of the layer deposited with flux-cored wires of the Fe-C-Si-Mn-Cr-Mo-Ni system additionally alloyed with titanium are presented. Surfacing with the investigated flux-cored wires was carried out on a substrate made of 09G2S steel using silicomanganese slag flux.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.