Issue |
E3S Web Conf.
Volume 331, 2021
International Conference on Disaster Mitigation and Management (ICDMM 2021)
|
|
---|---|---|
Article Number | 04006 | |
Number of page(s) | 6 | |
Section | Lesson Learnt in Disaster Management | |
DOI | https://doi.org/10.1051/e3sconf/202133104006 | |
Published online | 13 December 2021 |
Case study: mapping the tsunami-hazard zone in the Pasir Jambak sub-district, in Padang, Indonesia
Department of Civil Engineering, Faculty of Engineering, Padang Institute of Technology, Indonesia
* Corresponding author: melimuchlian@itp.ac.id
A tsunami hazard is an adverse event that causes damage to properties and loss of life. The problem in assessing a tsunami risk zone for a small area is significant, as available tsunami inundation zone data does not give detailed information for tsunami inundation and run-up in every nested grid. Hence, this study aims to establish a tsunami risk map in the Pasir Jambak sub-district, Padang, Indonesia. The map was carried out in every nested grid point of the area and on a large scale (1:5,000). The TUNAMI N3 program was used for the simulation of the tsunami inundation. A tsunami assessment was made through simulations in nine scenarios of fault parameter data for Sipora block earthquakes. The result of the study provides a tsunami inundation map. Furthermore, this tsunami inundation map can be used for communities, local authorities, government, and others for many studies, and decision-makers can come up with mitigation plans for a small study area.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.