| Issue |
E3S Web Conf.
Volume 237, 2021
3rd International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2020)
|
|
|---|---|---|
| Article Number | 01039 | |
| Number of page(s) | 6 | |
| Section | Environmental Protection and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202123701039 | |
| Published online | 09 February 2021 | |
Green Development Assessment of a Stainless-steel Industrial Park Based on Material Flow Analysis (MFA)
College of resources and environment, Chengdu University of Information Technology, 610225, China
* Wei Liu: weling9@163.com
Based on the material flow analysis method, the green development index system of industrial park was constructed. By using the PSR model, 13 indexes were divided into pressure layer, state layer and response layer, the indexes were standardized, weight distribution and synthesis. The green development level of industrial park was divided into 5 grades combined with the pressure state response factors. The results show that the energy consumption per unit industrial output of a stainless-steel industrial park is 0.7116 tons of standard coal per million yuan, the water consumption per unit industrial output is 6.1466 cubic meters per million yuan, the wastewater discharge per unit industrial added value is 3.12 tons per million yuan, the reduction rate of carbon emissions per unit industrial added value is 19.53%, and the green development index is 0.65, which belongs to the third level of green development. The problems are reflected in particulate emission, resource recycling, energy efficiency, industrial structure, and park greening. In the future, the stainless-steel industrial park should focus on industrial restructuring and transformation, environmental protection infrastructure construction, new policy guidance, and ecological environment construction of the park.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.