Issue |
E3S Web Conf.
Volume 237, 2021
3rd International Symposium on Architecture Research Frontiers and Ecological Environment (ARFEE 2020)
|
|
---|---|---|
Article Number | 03038 | |
Number of page(s) | 4 | |
Section | Architecture Science and Civil Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202123703038 | |
Published online | 09 February 2021 |
Study on the influence of fly ash and silica fume with different dosage on concrete strength
1
Zhejiang University of Water Resources and Electric Power, 310018 Hangzhou, Zhejiang, China
2
Zhejiang Huanlong Environmental Technology Co., Ltd, 324400 Quzhou, Zhejiang, China
* LIU Xue-ying: liuxy@zjweu.edu.cn
In order to improve the compressive strength of concrete, mineral admixtures can be added to concrete to replace part of the cement(C). Commonly used mineral admixtures include fly ash(FA) and silica fume(SF). Through a series of experiments, the effect of adding different amounts of fly ash and silica fume and double mixing on the strength of concrete was studied by using the same amount of substitute for cement under the same water-binder ratio. The results show that fly ash has a certain influence on improving the fluidity of concrete, and the influence on the strength of concrete is mainly in the later period; the influence of silica fume on the fluidity and strength of concrete is better than that of fly ash, and the main influence of silica fume is on the increase in strength. The early stage and the later stage are slower; the strength of concrete mixed with fly ash and silica fume at the same time increases first and then decreases with the increase of mineral admixtures.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.