| Issue |
E3S Web Conf.
Volume 244, 2021
XXII International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies (EMMFT-2020)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 13 | |
| Section | Resilience and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202124402005 | |
| Published online | 19 March 2021 | |
Optimization of the process of electrochemical wastewater treatment of yeast production
National Aviation University, Department of Biotechnology, 1 Liubomyra Huzara ave., 03058, Kyiv, Ukraine
* Corresponding author: strutinskaya@ukr.net
The process of purification and disinfection of yeast production sewage under the action of electrodialysis has been studied. As a result of research to determine the physicochemical and microbiological sewage composition, it was found that in sewage of the 1st degree of yeast separation has the highest excess content of organic and mineral substances in terms of: Chemical oxygen consumption (COC) - 31096/500 mg О2 / dm3, suspended solids - 6800 / 300 mg / dm3, chlorides - 2147/350 mg / dm3and sulfates - 6089/400 mg / dm3. The content of organic substances, which is characterized by the Chemical oxygen consumption (COC) indicator, in sewage of general discharge, 2nd and 3rd degree of yeast separation is 41%, 50% and 74% and that is lower than in sewage of the 1st degree of yeast separation. The number of microorganisms in terms of Total microbial count (TMC) in sewage of the 1st stage of yeast separation is the largest and is 12·107 colony-forming units CFU / cm3. It is determined that the process of sewage treatment and disinfection from minerals occurs more efficiently in the cathode zone, and from organic substances and microorganisms - in the anode zone of the electrodializer at a water temperature of 293 K, current of 0.1 A and duration of exposure 20 min.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.