E3S Web Conf.
Volume 244, 2021XXII International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies (EMMFT-2020)
|Number of page(s)||12|
|Section||Ecodesign and Energy Labelling|
|Published online||19 March 2021|
Innovative technologies in construction and Building Information Modeling
Voronezh State Technical University, Moscow Avenue, 14, Voronezh, 394026, Russia
* Corresponding author: Ella.email@example.com
The paper presents the results of research in the field of the use of innovative technologies in the design of buildings. The modern technologies of information modeling, in particular, BIM, which makes it possible to represent the building not only in three-dimensional space, but also allows designing it in the dynamic system « design - construction – operation » are considered. The experience of using BIM technologies is based on identifying errors at the initial design stage and the possibility of their elimination at the same stage. The development of mechanisms for detecting design errors and defects formed the basis of the task set in the work. A model for signaling about the detection of defects has been developed, and the problem of stochastic modeling of the qualitative parameters of the designed object has been solved.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.